This energy software is a rotary hammer designed for heavy-duty demolition, drilling, and chiseling duties in concrete, masonry, and stone. It employs an SDS Max chuck system, enabling fast and safe bit modifications. The “7” usually refers to a particular mannequin quantity or technology inside a producer’s product line, indicating efficiency traits and options.
These instruments are important for development professionals and tradespeople who require strong and environment friendly efficiency when working with exhausting supplies. Their affect mechanism and highly effective motor enable for quicker materials removing and lowered operator fatigue in comparison with customary drills. The SDS Max system ensures compatibility with a variety of specialised equipment, additional enhancing its versatility. The evolution of those instruments displays developments in motor expertise, vibration discount, and general sturdiness, resulting in elevated productiveness and consumer consolation.
The next sections will delve into the precise functions, options, upkeep, and concerns for choosing an acceptable mannequin, analyzing elements resembling energy output, affect vitality, vibration management, and bit compatibility intimately.
1. Affect vitality (Joules)
Affect vitality, measured in Joules, is a vital efficiency indicator for a rotary hammer. It quantifies the vitality delivered per affect by the software’s hammering mechanism, straight influencing its skill to interrupt, drill, or chisel via exhausting supplies. Within the context of the topic software, a better Joule ranking usually interprets to extra environment friendly and quicker materials removing.
-
Materials Penetration Price
A better affect vitality permits the software to penetrate denser supplies extra shortly and successfully. For instance, a rotary hammer with 8 Joules of affect vitality will bore via strengthened concrete a lot quicker than a mannequin with solely 3 Joules. This has implications for venture timelines, decreasing the time required for drilling or demolition duties.
-
Bit Measurement Compatibility
The desired affect vitality additionally dictates the scale of drill bits and chisels the software can successfully make the most of. A software with adequate affect vitality can drive bigger diameter drill bits or wider chisels with out vital efficiency degradation. This functionality expands the vary of functions for which the software is appropriate.
-
Consumer Fatigue Discount
Whereas counterintuitive, a better affect vitality can truly scale back consumer fatigue. A extra highly effective software completes duties quicker, requiring much less extended exertion from the operator. Furthermore, the software’s skill to effectively break the fabric lessens the necessity for extreme drive utility by the consumer.
-
Instrument Longevity
A rotary hammer working inside its meant affect vitality vary will doubtless expertise much less stress on its inside parts. Overloading a software by forcing it to work past its designed capability can result in untimely put on and tear. Choosing a software with an acceptable affect vitality for the meant functions contributes to its general lifespan.
The connection between affect vitality and the desired software is key to its operational effectiveness. Understanding the Joule ranking, its affect on materials penetration, bit compatibility, consumer fatigue, and gear longevity permits knowledgeable decision-making when choosing a rotary hammer for particular development or demolition wants. Selecting the best software with the suitable affect vitality is important for reaching optimum outcomes and maximizing the software’s working life.
2. Motor Energy (Watts)
Motor energy, measured in Watts, is a main determinant of a rotary hammer’s operational capability. In a software of this sort, the motor’s wattage ranking displays its skill to ship the mandatory drive for each rotation and percussive motion. A better wattage motor permits the rotary hammer to keep up constant efficiency beneath load, notably when drilling into dense supplies or performing heavy-duty chiseling. Inadequate motor energy can result in stalling, lowered effectivity, and potential injury to the software. For instance, a rotary hammer with a 1200W motor will usually exhibit superior efficiency in comparison with an 800W mannequin when drilling large-diameter holes in strengthened concrete.
The motor’s energy output straight influences the software’s versatility throughout totally different functions. A strong motor permits the software to be successfully used with a wider vary of equipment, together with bigger drill bits and varied chisel varieties, with out compromising efficiency. Moreover, a extra highly effective motor contributes to improved warmth administration, decreasing the danger of overheating throughout extended use. This attribute is especially vital in demanding development environments the place the software could also be subjected to prolonged durations of steady operation. The sensible significance of understanding this lies in choosing a mannequin whose motor energy aligns with the standard calls for of the meant functions, avoiding the pitfalls of underpowered or unnecessarily overpowered gear.
In abstract, motor energy is a vital specification to contemplate when evaluating a rotary hammer. It straight impacts the software’s efficiency, versatility, and sturdiness. Choosing a mannequin with enough motor energy ensures environment friendly operation, minimizes the danger of injury, and extends the software’s general lifespan. The challenges related to undersized motors, resembling lowered efficiency and elevated put on, underscore the significance of matching the motor energy to the anticipated workload. This understanding contributes to the broader purpose of optimizing software choice for development and demolition duties.
3. SDS Max Chuck
The SDS Max chuck is an integral element of the rotary hammer, defining its compatibility with drill bits and chisels designed for heavy-duty functions. Its design facilitates environment friendly vitality switch from the software to the accent, enhancing efficiency and sturdiness. The connection system between the SDS Max chuck and the accent supplies a safe, nearly slip-free interface, essential for demanding duties.
-
Safe Bit Retention
The SDS Max chuck employs a slotted drive system that permits the bit to maneuver axially inside the chuck. This motion is important for the hammer motion of the rotary hammer. The design ensures a safe grip on the bit, stopping slippage and maximizing vitality switch throughout operation. That is notably helpful when working with large-diameter drill bits or performing intensive demolition work.
-
Environment friendly Vitality Switch
The direct connection afforded by the SDS Max chuck minimizes vitality loss throughout the hammering course of. By rigidly coupling the bit to the software’s drive mechanism, the affect drive is effectively channeled to the working finish of the bit. This effectivity interprets to quicker materials removing charges and lowered put on on the rotary hammer’s inside parts. An instance of that is obvious when evaluating the efficiency of an SDS Max rotary hammer to 1 utilizing a standard keyed chuck when drilling via strengthened concrete.
-
Fast Bit Modifications
The SDS Max chuck system permits for fast bit modifications with out the necessity for instruments. This characteristic considerably improves productiveness, particularly in conditions the place frequent bit modifications are required. The operator can shortly swap between drilling and chiseling functions or change bit sizes with out interrupting the workflow. This ease of use is vital for sustaining effectivity on demanding job websites.
-
Accent Compatibility
The SDS Max customary ensures compatibility throughout a variety of equipment from varied producers. This standardization supplies customers with flexibility in choosing the suitable bits and chisels for particular duties. The provision of numerous equipment, together with core drills, scaling chisels, and floor rod drivers, expands the capabilities of the rotary hammer, making it a flexible software for numerous functions.
In conclusion, the SDS Max chuck is a vital aspect within the design and performance of the rotary hammer. Its safe bit retention, environment friendly vitality switch, fast bit modifications, and accent compatibility contribute to the general efficiency and flexibility of the software. The adoption of the SDS Max customary has streamlined operations and enhanced productiveness in development and demolition functions, solidifying its significance inside the energy software business.
4. Vibration Management
Vibration management is an important characteristic in a rotary hammer, straight impacting operator well being, security, and productiveness. The percussive motion required for drilling and chiseling generates substantial vibrations, which, if unchecked, can result in Hand-Arm Vibration Syndrome (HAVS) and different musculoskeletal issues. Due to this fact, efficient vibration management mechanisms are built-in into the design to mitigate these dangers. These mechanisms can embrace decoupled handles, dampened inside parts, and energetic vibration discount techniques. The presence and effectiveness of those options straight affect the protected operational time and general usability of the software.
Numerous producers make use of totally different methods to attain vibration management. Decoupled handles, for instance, isolate the operator’s palms from the primary physique of the software, decreasing the transmission of vibrations. Dampening parts inside the software soak up and dissipate vibrational vitality, minimizing its affect on the consumer. Lively vibration discount techniques make the most of counterweights or different dynamic parts to counteract the vibrations generated by the hammering mechanism. Every method has its benefits and drawbacks, impacting software weight, complexity, and price. The true life examples point out a major lower within the danger of creating HAVS amongst employees utilizing instruments with efficient vibration management measures.
The implementation of efficient vibration management represents a vital development in energy software design, balancing efficiency with operator well-being. The mixing of those techniques acknowledges the potential well being dangers related to extended publicity to vibrations and demonstrates a dedication to consumer security. Additional improvement and refinement of vibration management applied sciences will doubtless result in even safer and extra user-friendly instruments sooner or later. Choosing a rotary hammer with demonstrable vibration management is a greatest observe for prioritizing operator well being and making certain long-term productiveness.
5. Weight and Ergonomics
Weight and ergonomics are essential concerns within the design and choice of a rotary hammer. These elements straight affect operator consolation, management, and productiveness, in addition to the potential for long-term musculoskeletal pressure. A balanced method to weight distribution and ergonomic design minimizes fatigue and enhances the consumer’s skill to carry out duties precisely and effectively.
-
Affect on Maneuverability
The burden of a rotary hammer straight impacts its maneuverability, notably in overhead or confined areas. A lighter software permits for simpler positioning and reduces the bodily pressure related to extended use in awkward positions. For instance, a employee drilling right into a ceiling for an prolonged interval will expertise considerably much less fatigue with a lighter mannequin in comparison with a heavier one. The trade-off usually entails a discount in energy, necessitating a cautious analysis of the meant functions.
-
Deal with Design and Grip
Ergonomic deal with designs, incorporating options resembling textured grips and optimized deal with angles, improve operator management and scale back hand fatigue. A well-designed grip minimizes the drive required to keep up a safe maintain on the software, decreasing the danger of slippage and enhancing precision. Actual-world functions present that customers report much less discomfort and improved management with handles that conform naturally to the hand.
-
Vibration Absorption and Distribution
Weight distribution and ergonomic design can contribute to vibration absorption and distribution. A balanced software, with weight evenly distributed all through its construction, minimizes the transmission of vibrations to the operator’s palms and arms. Moreover, strategically positioned vibration-dampening supplies inside the deal with and physique of the software can additional scale back vibration publicity, mitigating the danger of Hand-Arm Vibration Syndrome (HAVS).
-
Lengthy-Time period Well being and Security
Prioritizing weight and ergonomics is important for selling long-term well being and security amongst operators. Extended use of heavy, poorly designed instruments can result in continual musculoskeletal points, lowered productiveness, and elevated danger of office accidents. Choosing a rotary hammer that minimizes pressure and promotes snug operation demonstrates a dedication to employee well-being and contributes to a safer and extra productive work surroundings.
The interaction between weight and ergonomics is a vital issue within the general efficiency and usefulness of a rotary hammer. Cautious consideration of those points, alongside energy and performance, is important for choosing a software that maximizes effectivity, minimizes consumer fatigue, and promotes long-term well being and security. One of the best fashions strike a steadiness between energy and luxury, permitting operators to carry out demanding duties with minimal pressure and most management.
6. Drilling Capability
Drilling capability, within the context of a rotary hammer, defines the utmost diameter and depth of holes that the software can successfully create in varied supplies. This specification is straight associated to the facility output, affect vitality, and chuck system of the software, and it serves as a main indicator of its suitability for particular functions.
-
Materials Hardness
The drilling capability of a rotary hammer is considerably influenced by the hardness of the fabric being drilled. A rotary hammer might exhibit a excessive drilling capability in softer supplies like brick or hole concrete block, however this capability shall be significantly lowered when drilling into strengthened concrete or pure stone. The software’s skill to beat the fabric’s resistance is paramount. For instance, a typical rotary hammer may drill a 40mm gap in brick, however solely a 25mm gap in strengthened concrete whereas sustaining optimum efficiency and bit longevity.
-
Bit Kind and Design
The sort and design of the drill bit straight affect the efficient drilling capability. SDS Max bits are designed for environment friendly materials removing and may considerably improve the drilling capability of the rotary hammer. Core bits, designed for creating large-diameter holes, require a strong rotary hammer with a excessive torque output to attain their most drilling capability. Choosing the suitable bit sort for the fabric and desired gap dimension is essential for maximizing the software’s efficiency. A poorly chosen bit can pressure the software and scale back drilling capability or injury the software.
-
Energy and Affect Vitality
A rotary hammer’s motor energy and affect vitality are straight correlated with its drilling capability. Greater wattage motors and larger affect vitality (measured in Joules) allow the software to drill bigger diameter holes in tougher supplies. The motor supplies the rotational drive, whereas the affect mechanism delivers the percussive drive essential to fracture the fabric. Inadequate energy or affect vitality will restrict the drilling capability and result in lowered effectivity and elevated put on on the software. A comparative evaluation of various fashions reveals that higher-powered instruments constantly display superior drilling capability in difficult supplies.
-
Drilling Depth
Whereas diameter is a main measure, drilling depth can be a element of drilling capability. The software’s skill to keep up constant efficiency over depth is usually ignored. Deeper holes require larger torque and environment friendly mud removing. The design of the drill bit flutes, which take away particles from the opening, and the software’s cooling system can affect the software’s skill to attain most drilling depth. A rotary hammer designed for deep drilling will characteristic optimized mud extraction and a strong cooling system to stop overheating.
In conclusion, drilling capability of the rotary hammer is a multifaceted efficiency parameter influenced by the software’s energy, affect vitality, the kind of bit used, and the traits of the fabric being drilled. Understanding these elements permits for the choice of the suitable software and equipment for the precise drilling utility, making certain optimum efficiency and stopping injury to the gear.
7. Chiseling Perform
The chiseling operate represents a core functionality of the topic rotary hammer, increasing its utility past easy drilling. This operate, enabled by the software’s highly effective percussive mechanism, permits it to carry out demolition, materials removing, and floor preparation duties. The chiseling operate on these rotary hammers is usually engaged by disengaging the rotation of the drill bit, channeling the software’s vitality solely into impactful blows. Actual-world examples embrace eradicating tiles, breaking apart concrete slabs, and creating channels for conduit or piping. The effectiveness of this operate hinges on the software’s affect vitality, the kind of chisel bit used, and the operator’s approach. A strong software, correctly geared up, can considerably scale back the effort and time required for these duties in comparison with guide strategies or much less highly effective instruments. The sensible significance of this functionality lies in its versatility, permitting development professionals to make the most of a single software for a number of functions.
Moreover, the chiseling operate’s efficiency is intently tied to the SDS Max chuck system. This technique ensures a safe and environment friendly switch of vitality from the software to the chisel bit. The SDS Max interface permits for fast and simple bit modifications, enabling customers to quickly swap between totally different chisel varieties primarily based on the precise job. As an illustration, a pointed chisel is appropriate for concentrated demolition, whereas a large, flat chisel is simpler for eradicating massive floor areas. The provision of varied chisel attachments, mixed with the software’s highly effective hammering motion, permits for exact and managed materials removing, minimizing the danger of injury to surrounding constructions. Upkeep duties associated to this operate embrace common inspection and alternative of worn chisel bits, in addition to correct lubrication of the chuck mechanism to make sure easy operation and forestall untimely put on.
In abstract, the chiseling operate is an integral side of the topic rotary hammer, considerably enhancing its versatility and worth in development and demolition functions. Its effectiveness relies on the software’s inherent energy, the SDS Max chuck system, and the suitable choice and upkeep of chisel bits. Whereas providing appreciable benefits when it comes to pace and effectivity, the profitable implementation of the chiseling operate necessitates correct coaching and adherence to security tips to attenuate the danger of damage. The mix of sturdy development and versatile performance makes this gear a cornerstone software in varied development trades.
8. Sturdiness and Construct
The sturdiness and construct high quality of a rotary hammer are paramount to its long-term efficiency and reliability, particularly inside the context of industrial quality functions related to the topic software. The inherent nature of demolition, drilling, and chiseling topics the software to vital stress, vibration, and potential affect. Due to this fact, the supplies used, the precision of producing, and the robustness of the interior parts straight correlate with the software’s skill to resist these demanding circumstances and keep operational effectiveness over an prolonged lifespan. For instance, a mannequin constructed with a high-strength alloy housing and strengthened affect mechanism will invariably outlast a comparable software constructed with lower-grade supplies. Untimely failure of a rotary hammer as a result of insufficient sturdiness results in venture delays, elevated gear prices, and potential security hazards.
The sensible implications of understanding the “Sturdiness and Construct” of rotary hammers lengthen to upkeep procedures and anticipated service life. Instruments constructed with high-quality parts usually require much less frequent upkeep and are extra immune to put on and tear. Seals, bearings, and the motor’s armature are notably weak to break in demanding environments. A well-built rotary hammer incorporates options like sealed lubrication techniques, impact-resistant housings, and strong motor windings to mitigate these dangers. Think about a state of affairs the place a development crew is engaged on a vital infrastructure venture with tight deadlines. The failure of a rotary hammer as a result of poor construct high quality may end up in vital monetary losses and schedule disruptions. Investing in a sturdy and well-built software, subsequently, turns into an economically prudent determination.
In conclusion, the correlation between sturdiness, construct high quality, and the general efficiency of the topic software is plain. Strong development is just not merely a fascinating attribute; it’s a elementary requirement for making certain dependable operation, minimizing downtime, and maximizing the software’s return on funding. The mixing of high-quality supplies, precision engineering, and efficient protecting measures are important for withstanding the trials of industrial quality functions and lengthening the software’s operational lifespan. A give attention to these points when choosing a rotary hammer is essential for maximizing its effectiveness and making certain its contribution to profitable venture outcomes.
9. Variable Pace Management
Variable pace management is a vital characteristic in rotary hammers that straight influences the software’s versatility and precision throughout varied functions. This performance permits the operator to regulate the rotational pace of the drill bit or chisel, optimizing efficiency for various supplies and duties. The mixing of variable pace management enhances the software’s adaptability, selling each effectivity and accuracy.
-
Materials Compatibility
Completely different supplies require various drilling or chiseling speeds to attain optimum outcomes. Softer supplies, resembling brick or tile, usually necessitate decrease speeds to stop cracking or chipping. Conversely, tougher supplies like concrete or stone might require greater speeds to facilitate environment friendly materials removing. Variable pace management permits the operator to tailor the software’s efficiency to the precise materials being labored on, making certain each effectiveness and minimizing materials injury. As an illustration, a consumer eradicating ceramic tile may choose a low pace to stop shattering the tile, whereas a better pace could be chosen for drilling right into a concrete basis.
-
Precision and Management
Variable pace management enhances the operator’s skill to keep up exact management over the software, notably when beginning a gap or performing delicate chiseling work. A sluggish start-up pace permits for correct positioning of the drill bit or chisel, minimizing the danger of bit strolling or unintended injury to the encircling space. As the duty progresses, the pace may be regularly elevated to optimize efficiency. Expert operators leverage this characteristic to attain clear, correct outcomes, particularly in functions the place precision is paramount.
-
Bit Life Extension
Working a drill bit or chisel at an inappropriate pace can result in untimely put on and tear. Extreme speeds can generate extreme warmth, which might weaken the bit’s chopping edges and scale back its lifespan. Conversely, inadequate speeds could cause the bit to bind or stall, inserting undue stress on the software’s motor and doubtlessly damaging the bit. Variable pace management permits the operator to pick out the optimum pace for the duty, minimizing warmth buildup and lengthening the lifespan of drill bits and chisels.
-
Security Concerns
In sure functions, extreme pace can improve the danger of accidents or accidents. For instance, when utilizing a core bit to drill large-diameter holes, extreme pace could cause the bit to bind, doubtlessly resulting in kickback and lack of management. Equally, when chiseling close to delicate areas, extreme pace can improve the danger of inadvertently damaging adjoining constructions or utilities. Variable pace management permits the operator to keep up protected working circumstances by limiting the software’s pace to a stage acceptable for the duty and surroundings.
The incorporation of variable pace management considerably expands the utility and security profile of those rotary hammers, permitting them to be successfully and safely deployed throughout a large spectrum of development and demolition duties. By enabling the operator to adapt the software’s efficiency to the precise calls for of every utility, variable pace management contributes to elevated effectivity, improved precision, and lowered materials waste. The characteristic’s affect on bit longevity and general security additional underscores its worth in skilled settings.
Incessantly Requested Questions on Rotary Hammers with SDS Max Chucks
The next part addresses frequent queries relating to rotary hammers geared up with the SDS Max chuck system. These questions goal to make clear functionalities, functions, and upkeep practices.
Query 1: What distinguishes the SDS Max chuck system from different chuck varieties?
The SDS Max chuck makes use of a slotted drive system designed for heavy-duty functions. It supplies a safer bit retention and environment friendly vitality switch in comparison with SDS Plus or keyed chucks. This technique is engineered to resist the excessive affect forces generated throughout demanding demolition and drilling duties.
Query 2: For what kinds of supplies is the rotary hammer with SDS Max optimally suited?
These instruments are primarily designed to be used on concrete, masonry, and stone. Their excessive affect vitality and strong development make them perfect for drilling large-diameter holes and performing heavy chiseling work in these supplies.
Query 3: What’s the significance of affect vitality, measured in Joules, for these instruments?
Affect vitality quantifies the drive delivered per blow by the hammering mechanism. A better Joule ranking signifies larger effectiveness in breaking via exhausting supplies. This specification is vital for evaluating the software’s efficiency in demanding functions.
Query 4: What upkeep procedures are important for prolonging the lifetime of a rotary hammer with SDS Max?
Common upkeep ought to embrace cleansing and lubricating the chuck, inspecting the facility wire for injury, and periodically checking the carbon brushes within the motor. Adhering to the producer’s advisable upkeep schedule is essential for making certain optimum efficiency and stopping untimely put on.
Query 5: What security precautions ought to be noticed when working a rotary hammer with SDS Max?
Customers should put on acceptable private protecting gear, together with security glasses, listening to safety, and gloves. Making certain correct air flow can be important, notably when working in enclosed areas. It’s crucial to rigorously learn and cling to the producer’s security directions earlier than working the software.
Query 6: How does vibration management expertise contribute to consumer well being and security?
Vibration management techniques mitigate the transmission of vibrations to the operator’s palms and arms, decreasing the danger of creating Hand-Arm Vibration Syndrome (HAVS). Efficient vibration management enhances consumer consolation and extends protected working time.
Understanding these points of rotary hammers with SDS Max chucks is essential for choosing the suitable software and making certain its protected and efficient operation.
The next part will delve into choosing the proper mannequin for particular functions.
Optimizing Efficiency and Longevity
The next tips are meant to maximise the effectiveness and lengthen the operational lifetime of the desired software, thereby decreasing downtime and enhancing general productiveness in development and demolition functions.
Tip 1: Choose the Applicable Bit for the Materials:
Make the most of drill bits and chisels particularly designed for the fabric being labored on. Using the proper bit minimizes pressure on the rotary hammer and optimizes materials removing charges. As an illustration, use a carbide-tipped bit for strengthened concrete and a scaling chisel for eradicating tile.
Tip 2: Preserve Constant Stress and Keep away from Overloading:
Apply regular, uniform strain whereas drilling or chiseling. Keep away from forcing the software past its capability, as overloading can result in motor burnout or injury to the affect mechanism. Permit the software to do the work, fairly than making use of extreme drive.
Tip 3: Repeatedly Clear and Lubricate the Chuck:
The chuck is a vital element that requires common upkeep. Clear the chuck after every use to take away particles and apply a high-quality lubricant to make sure easy bit insertion and removing. Neglecting this step can result in bit slippage and accelerated put on.
Tip 4: Examine and Exchange Worn Carbon Brushes:
Carbon brushes are important for the motor’s operation. Repeatedly examine the brushes for put on and exchange them promptly once they attain their put on restrict. Worn brushes could cause arcing and scale back the software’s energy output.
Tip 5: Make the most of Vibration Management Options Successfully:
Make use of the vibration management options, resembling decoupled handles, to attenuate publicity to dangerous vibrations. Correct utilization reduces operator fatigue and mitigates the danger of creating Hand-Arm Vibration Syndrome (HAVS). Guarantee handles are securely hooked up and in good working order.
Tip 6: Retailer the Instrument Correctly:
Retailer the rotary hammer in a clear, dry surroundings, away from excessive temperatures and humidity. Correct storage prevents corrosion and protects delicate parts from injury. Make the most of the carrying case supplied to safeguard the software throughout transport and storage.
These suggestions, if adopted constantly, will improve the software’s effectivity and lengthen its service life, contributing to improved venture outcomes and lowered operational prices. By prioritizing correct upkeep and operational methods, customers can make sure the rotary hammer constantly performs at its optimum stage.
The following part supplies a concise abstract of the article, highlighting the important options and concerns for utilizing the rotary hammer.
Conclusion
The exploration of the martelete perfurador sds max 7 has underscored its important function in heavy-duty development and demolition functions. Key options resembling affect vitality, motor energy, the SDS Max chuck, vibration management, and variable pace performance decide its efficiency and flexibility. The right choice, upkeep, and operational methods are vital for maximizing its lifespan and making certain consumer security.
Ongoing developments in energy software expertise are anticipated to additional improve the effectivity and ergonomics of comparable instruments. Development professionals ought to stay knowledgeable about these developments to optimize their software choice and operational practices, making certain each productiveness and security in demanding work environments. Continued adherence to greatest practices and producer suggestions is important for the accountable and efficient utilization of the martelete perfurador sds max 7.
